The circuit breaker tester under UHV power can help many power workers conduct various power tests more conveniently.

The function of the high-voltage switch characteristic tester is mainly to measure parameters such as high-voltage switch point, closing time, formation and speed. The main testing time is the closing and opening time. When using it, it is necessary to strictly follow the relevant regulations of the process. Today, we will specifically introduce the characteristics and operating steps of the high-voltage switch tester.

1. Connect the power supply of the high-voltage switch characteristic tester. At this point, we will notice that the cursor points to the dynamic feature and press the confirm button to enter the fracture state.

2. Set parameters. After completing the first step, parameters need to be set. If you want to view or change the parameters of the switch, you can press a button to enter the parameter setting state. You can perform vacuum or non vacuum switches on the screen. Their difference lies in that they are very sensitive to bouncing in a vacuum state, mainly for measuring vacuum switches; In a non vacuum state, the channel line must be connected to a non vacuum anti-interference device in the presence of strong electromagnetic interference. Connect the disruptor to the fracture site to be used.

3. After setting up, move the cursor to the position where the test starts to close, and the saved setting values will appear. If the same model of switch test is repeated, you can choose to save the set values.

When operating the high-voltage switch characteristic tester, you can follow the above steps. If printing is required, you can press the print button to print the content displayed on the screen. If there is a lot of content, you can press the confirm button to view the screen.