Recently, after-sales technicians from Wuhan UHV Company went to Dongying, Shandong to provide product technical training. The customer purchased a series of equipment including UHV-280 insulation boot glove withstand voltage test device, UHV-S10A DC resistance tester, UHV-H100A circuit resistance tester,UHV-702 microcomputer relay protection tester, etc. On March 11th, Wuhan UHV Company's after-sales personnel arrived in Dongying, Shandong and went to the customer's company the next day for on-site test guidance. The main contents of this test were insulation rod withstand voltage test, insulation boot glove leakage test, and voltage test for starting the voltage tester
The fully automatic power safety tool testing platform is developed based on the requirements of the Notice on Issuing the "Preventive Testing Regulations for Power Safety Tools" (Trial) issued by the State Power Corporation (State Grid Corporation of China) (State Grid Corporation of China [2002] No. 777) and the Power Safety Work Regulations (Substation Part) of State Grid Corporation of China. All indicators of this product meet the requirements of the national standard. Intelligent insulation withstand voltage tests can be conducted on safety tools such as insulated shoes and gloves according to the requirements of the "Preventive Testing Regulations for Electric Power Safety Tools". The endurance test cycle for insulated shoes and gloves is six months, and breakdown is not allowed during the test process. At the same time, the leakage current of insulated shoes and gloves should not exceed the limit value. The product is suitable for all industries related to electricity.
The instrument can simultaneously test 8 insulated boots or gloves and measure the leakage current of each test sample. The insulation shoe test adopts a dry test method with small steel balls placed inside, which eliminates the traditional practice of pouring water into the shoe for testing and making it difficult to dry after the test is completed. High and low voltage separation, leakage current is transmitted to the control box using anti-interference wireless transmission technology, greatly protecting personal safety. Each test sample has a breaking mechanism. When any one of the circuits breaks down or exceeds the set leakage current value, the test sample will automatically detach from the test without affecting the testing of other samples.
Wuhan UHV technicians assembled the testing device at the customer's testing site with the help of on-site staff. The test object for this experiment was a 35kV insulated pole, and the test voltage was 95kV, which was relatively high. Therefore, safety personnel were set up throughout the entire process. The standard testing methods for insulated boots and gloves were demonstrated once during this training. After the demonstration test, the customer personally operated and used the instrument and wiring to ensure that they could master the testing method.
During the explanation by the after-sales technical personnel of Wuhan UHV, the customer was quickly able to independently use the equipment for testing. Wuhan Ultra High Voltage Company provides after-sales technical support. No matter when you purchase Wuhan UHV instruments, Wuhan Ultra High Voltage will provide you with professional consulting services. Wuhan UHV will reply to your letter or phone call as soon as possible to help you solve any problems.
Wuhan UHV believes that its after-sales service will make you feel more at ease when using its products. Please feel free to contact Wuhan UHV at any time, and they will be dedicated to serving you!
